Perform a basic search of our site

Skew Rip System with 2 Moving Blade Saw

Cameron Skew Rip System

Skew Rip Systems

Typical Skew users:

  • Custom Moulding & Millwork.
  • Mid-Size Custom Cabinet Shop
  • Wholesale Lumber Distributor.

Advantages

  • We call it The Skew because the fence will skew to the left or to the right to increase the yield on boards that do not have a straight edge.
  • Our programmers write our software in-house allowing changes and free upgrades.
  • Floor spaces is 62" x 154", the smallest in the industry.
  • All incoming and outgoing pieces are tallied to help you control inventory and reduce material cost.

Cameron Skew with 2 Moving Blade Saw

  • 12' of 16' long configurations
  • 5-7 Boards per minute
  • 3' - 12' Length (16' Length on 16' Skew)
  • 2.5" Maximum Thickness
  • 15" Maximum Width
  • 5,000-7000 Board Feet per shift
  • 2 Moving Blades
  • Multiple Fixed Blades
  • Auto Feed
  • Auto Skew
  • Variable speed up to 130 feet per minute
  • Three (3) sets of anti-kickback fingers
  • Four (4) individual pressure rolls
  • Steel dip chain construction with urethane inserts
  • Powered out-feed roller
  • Digital controlled lubricator for feed chain.
  • Saw blade positioning is by servo motor
  • Accommodates 12" & 14" diameter saw blades
  • Powered by 50 hp or 60 hp motor
  • Glide lock spindle technology
  • Amp meter for monitoring arbor motor running amperage
  • Easily accessed v-belt driving saw arbor for reduced vibration and higher tolerances
  • Easy access to spindle and blades for maintenance and tooling changes
Skew Board with Lasers
Skew on Kuang Yung Saw
3 Pinch Rollers Feeding Board
Inside the Saw
Glide Lock Spindle