Return Conveyors

Putting a return conveyor on your shaper sander or edgebander is a no-brainer. At less than the annual cost of an operator to tail the machine, a return conveyor will pay for itself in less than a year.

Why a Taylor Return Conveyor?

When you buy a Taylor Return Conveyor, you buy more than a machine, you buy into a company that partners with you to make your company productive. Cameron Automation is a division of James L. Taylor which has served the woodworking industry for over 100 years. In that time, we have developed and maintained a level of customer service and products that are second to none.

Our machines are American made. From where Richie unloads raw steel from trucks to where Chris packs a completed machine for shipping, it's all done here in the US. We maintain a large inventory of parts ready for next day delivery.

We support our customers with an available and knowledgeable service staff. Our service is second to none. Just ask any of our thousands of satisfied customers.

Quick Return for Edge Bander

Taylor Return System for Edge Banders

Customize your Return Conveyor to Fit your Process

  • Three machine lengths return material up to 60", 84" long or 96" long.
  • 24" or 36" Rollers on return conveyors can handle up to 36" or 50" wide material.
  • Any Length Return Section composed of modular sections.
Return Conveyor System / Wide Belt Sander

Taylor Return System for Wide Belt Sanders

Customize your Return Conveyor to Fit your Process

  • Three machine lengths return material up to 60", 84" long or 96" long.
  • 24" or 36" Rollers on return conveyors can handle up to 36" or 50" wide material.
  • Any Length Return Section composed of modular sections.
Taylor Return System for Shaper/Sander

Taylor Return System for Shaper Sander

36" x 60 " for Smaller Shops

  • Returns material up to 36" wide and 60" long.
  • 7' Return (measured from tail end of shaper/sander) standard.
  • Return Conveyor is composed of modular sections.

60" x 84" for Larger Shops

  • Returns material up to 60" wide and 84" long.
  • 7' Return (measured from tail end of shaper/sander) standard.
  • Return conveyor is composed of modular sections
Quick Return for Straight Line Rip Saw

Taylor Return System for a Straight Line Rip Saw

Return Conveyors on straight line rip saw have a fast payback. Most boards need 2+ passes through the saw, so productivity is increased by 100% or more. Usually the catch width is sized so boards can be ripped on both sides of the blade.