- Automated Operation
- Designed For Long Material
- Continuous Flow Operation
- “Smart Clamp” Software
- Available in Pneumatic and Hydraulic
The Side Loading Automated Clamp
Carrier is the latest addition to our Automated Clamp
Carrier line of industrial clamps. The system includes all the productivity
and design features of our Automated Clamp Carrier.
However, it is equipped with a side loading infeed
table and application system. This industrial clamping design is
especially effective when edge gluing or laminating
long material. Productivity levels are higher
than the standard Automated Clamp Carrier because
panels are being laid up on the infeed table at the same
time that the previous panel is being tightened and flattened.
In addition, large panels are pushed out of the machine
onto a table or conveyor. This eliminates heavy lifting.
Production
Production is based on cycle time and panel size. Assuming
that each section is curing 1 panels 24”x 96” (60 cm x 244
cm) and assuming a cycle time of 60 seconds, production
per shift equals:
One Panel:
=16 ft2 (1.49M2)
One Section:
=16 ft2 (1.49M2)
One Cycle:
=60 seconds
=60 cycles/hour
=480 cycles/shift
Production output:
=16 ft2 x 480 cycles or 7680 ft2/shift
=1.49 M2 x 480
cycles or 715 M2/shift |
