- Simple
Operation
- Faster Uniform Clamping
- Expandable
- Economical
- Available in Pneumatic & Hydraulic
The Classic Clamp Carrier is our most versatile wood working clamps model. Sizes range from 20 to 80 sections with widths up to 16-1/2' (5M) wide. Most machines are equipped with Pneumatic Air Motor Drive for rotation, Clamp Tightener and Panel Flattener. The smaller machines work well with the Plate Spreader (manual glue applicator). As with all Taylor Clamp Carriers, smaller machines can be expanded as production requirements grow. The Classic Clamp Carrier is an ideal clamping system when a wide variety of products are to be glued.
Production
Production is based on cycle time and panel size. Assuming
that each section is curing 3 panels whose dimensions
are 24" x 24" (60cm x 60cm) and assuming
a cycle time of 2 minutes, production per shift equals:
One Panel:
=4 ft2 (.36M2)
One Section:
=12 ft2 (1.1M2)
One Cycle:
=2 minutes
=30 cycles/hour
=210 cycles/shift
Production output:
=12 ft2 x 210 cycles or 2520 ft2/shift
=1.1 M2 x 210
cycles or 231 M2/shift
|
